Using Stored Custom Stitches; Storing Custom Stitches In Your List; If The Memory Is Full - Brother DreamWeaver„ XE VM6200D Operation Manual

USING STORED CUSTOM STITCHES

USING STORED CUSTOM STITCHES

Storing Custom Stitches in Your
List
Stitch patterns created using the "MY CUSTOM
STITCH" function can be stored for later use. Once
you finish entering the stitch data, press
The "Saving" message appears and the stitch will
be stored.
Before storing a stitch, press
test-run of the stitch.
Memo
• Storing a stitch pattern takes a few
seconds.
• For details on retrieving a stored stitch
pattern, see page S-105.
Note
• Do not turn off the machine while the
"Saving" message is displayed, otherwise
the stitch pattern data being saved may be
lost.
S-104

■ If the Memory is Full

If the following message appears after
pressed, the stitch pattern cannot be stored because
either the machine's memory is full or the stitch
pattern being stored is larger than the amount of
space available in the memory. To be able to store
. the stitch pattern in the machine's memory, a
previously stored stitch pattern must be deleted.
to sew a
Note
• To save custom stitches to USB media or in
the computer, follow the previously
described procedure to store the custom
stitch, and then press
stitch (see the following "Retrieving Stored
Stitches" section). Press
stitch to USB media or in the computer. (For
details, "Saving Stitch Patterns to USB
Media" on page S-90 or "Saving Stitch
Patterns in the Computer" on page S-91.)
is
to select the
to save the