Selecting The Embroidering Position By The Pattern Edge - Brother DreamWeaver„ XE VM6200D Operation Manual

USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE
h
.
Press
→ The embroidering position selection screen appears.
i
Select the method for positioning the
embroidery pattern.
* To align the edge of the embroidery with a pattern
or mark on the fabric, select the edge. If the center of
the pattern to be embroidered is determined, select
the center position.
■ Selecting the Embroidering Position
by the Pattern Edge
a
From on the screen, press the edge
to be the reference for positioning.
b
.
Press
B-84
c
With the sensor pen, touch the point on the
fabric corresponding to corner a in the
screen.
a Square of pattern edge
b Pattern position
d
With the sensor pen, touch the point on the
fabric corresponding to corner b in the
screen.
a Square of pattern edge
b Pattern position
e
Press to adjust the positions.
→ If you don't need to adjust the positions, continue to
i
step .