Selecting Utility Stitches; Selecting A Stitch; Using The Mirror Image Key - Brother DreamWeaver„ XE VM6200D Operation Manual

SELECTING UTILITY STITCHES

Selecting a Stitch

There are 5 categories of Utility Stitches.
a
Turn the main power to ON and display the
utility stitches.
→ Either "1-01 Straight stitch (Left)" or "1-03 Straight
stitch (Middle)" is selected, depending on the setting
selected in the settings screen.
b
Use
category you want.
* Press to view the next page.
* Press to view previous page.
a
c
a Preview of the selected stitch
b Stitch selection screen
c Percentage size of view
c
Press the key of the stitch you want to sew.
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" on page S-62.

■ Using the Mirror Image Key

Depending on the type of utility stitch you select,
you may be able to sew a horizontal mirror image of
the stitch.
If
possible to make a mirror image of the stitch.
to select the
Press
selected stitch.
The key will display as
b

SELECTING UTILITY STITCHES

is lit when you select a stitch, it will be
Note
• If is light gray after you select a stitch,
you cannot create a horizontal mirror image
of the selected stitch due to the type of
stitch or type of presser foot recommended
(this is true of buttonholes, multi-directional
sewing, and others).
to create a horizontal mirror image of the
.
S
2
Sewing S-21