Button Sewing; Bar Tacks On Thick Fabrics - Brother DreamWeaver„ XE VM6200D Operation Manual

e
Lower the buttonhole lever so that it is
positioned behind the metal bracket on the
buttonhole foot.
a Metal bracket
f
Gently hold the end of the upper thread and
begin sewing.
→ When sewing is completed, the machine will sew
reinforcement stitches and stop automatically.

■ Bar Tacks on Thick Fabrics

Place a piece of folded fabric or cardboard beside
the fabric being sewn to level the buttonhole foot
and allow for easier and even feeding.
a Presser foot
b Thick paper
c Fabric
Memo
• If automatic thread cutting is turned on
before you start sewing, both threads are
automatically cut after the reinforcement
stitches are sewn. If the fabric does not feed
(for example, because it is too thick),
increase the stitch length setting.

Button Sewing

Buttons with 2 or 4 holes can be attached, using
the machine.
See page S-62 for the detailed information of
stitches.
Stitch Stitch name

Button sewing

Note
• Do not use the automatic thread cutting
function when sewing buttons. Otherwise,
you will lose the thread ends.
a
Select .
→ The feed dogs are lowered automatically.
b
Raise the presser foot.
SEWING THE STITCHES
Presser foot
Sewing S-55
S
2