Brother DreamWeaver„ XE VM6200D Operation Manual page 138

Embroidery and sewing machine
Hide thumbs Also See for DreamWeaver„ XE VM6200D:
Table of Contents

Advertisement

SEWING THE STITCHES
Stitch
Stitch name
Bound buttonhole
Keyhole buttonhole
Tapered keyhole buttonhole
Keyhole buttonhole
One-step buttonholes are sewn from the front of
the presser foot to the back, as shown below.
a Reinforcement stitching
S-50
a
Select a buttonhole stitch, and attach
Presser foot
buttonhole foot "A".
b
Mark the position and length of the
buttonhole on the fabric.
a Marks on fabric
b Buttonhole sewing
c
Pull out the button holder plate on the
presser foot, and insert the button that will
be put through the buttonhole. Then tighten
the button holder plate around the button.
a Button holder plate
d
Align the presser foot with the mark on the
fabric, and lower the presser foot.
a Mark on the fabric
b Marks on the presser foot
1
Memo
• The maximum buttonhole length is about
28 mm (approx. 1-1/16 inches) (diameter +
thickness of the button).
Memo
• The size of the buttonhole is determined by
the size of the button in the button holder
plate.
A
2

Advertisement

Table of Contents
loading

Table of Contents