Automatic Fabric Sensor System (Automatic Presser Foot Pressure) - Brother DreamWeaver„ XE VM6200D Operation Manual

d
Press the "Start/Stop" button to stop the
machine at the point where the sewing
direction changes.
→ The machine stops with the needle in the fabric, and
the presser foot is raised.
e
Rotate the fabric, and then press the
"Start/Stop" button.
→ The presser foot is automatically lowered, and
sewing continues.
Automatic Fabric Sensor System
(Automatic Presser Foot
Pressure)
The thickness of the fabric is automatically
detected and the presser foot pressure is
automatically adjusted with an internal sensor
while sewing, to insure that your fabric is fed
smoothly. The fabric sensor system works
continuously while sewing. This function is useful
for sewing over thick seams (see page S-8), or
quilting (see page S-35).
a
Press to display "Automatic Fabric
Sensor System" in the settings screen.
b
Set "Automatic Fabric Sensor System" to
"ON".
c
Press to return to the original screen.
USEFUL FUNCTIONS
Sewing S-17
S
1