Using Stored Custom Stitches; Storing Custom Stitches In Your List; Retrieving Stored Stitches - Brother 888-L01 Operation Manual

Using Stored Custom Stitches

Storing custom stitches in your list

Stitch patterns created using the MY CUSTOM STITCH
function can be stored for later use. Once you finish entering
the stitch data, press and then press either
When you save the pattern to USB flash drive, it is saved in a
folder labeled "bPocket". The "Saving..." message appears
and the stitch will be stored.
Before storing a stitch, press
Memo
• Storing a stitch pattern takes a few seconds.
• For details on retrieving a stored stitch pattern,
see page D-23.
Note
• Do not turn off the machine while the "Saving..."
message is displayed, otherwise the stitch
pattern data being saved may be lost.
■ If the memory is full
If the following message appears after
stitch pattern cannot be stored because either the
machine's memory is full or the stitch pattern being stored
is larger than the amount of space available in the
memory. To be able to store the stitch pattern in the
machine's memory, a previously stored stitch pattern must
be deleted.
or .
to sew a test-run of the stitch.
is pressed, the
Using Stored Custom Stitches

Retrieving stored stitches

a
Press .
b
Press or to select the location of the pattern to
be retrieved.
c
Select the stitch pattern.
• Press / to move to the previous/next page.
• Press to return to the previous screen without
retrieving.
d
Press .
• To delete the stored stitch pattern, press
• To edit the stored stitch pattern, press
Note
• When a retrieved pattern is saved after it has
been edited, the edited pattern is saved as a
different file.
Decorative sewing D-23
D
.
.