Custom White Balance - Canon EOS-1DS Mark III Instruction Manual

_e_ Custom White Balance
Custom wNte balance enables you to manually set the wNte balance
for a specific light source for better accuracy. Up to five Custom white
balance data can be registered to the camera. You can also append a
name (caption) to the registered Custom wNte balance data.
Registering Custom WB
There are two ways to register Custom white balance data= You can
either take a picture and register it, or register an image already saved
in the memory card.
[Record and register image]
_ Select [Custom WB regist.].
® Under the [_°] tab, select [Custom
WB registo], then press <_>.
_ elect the Custom WB No. to be
registered.
® Press <_>.
® Turn the <O> dial to select 1 to 5 for
<_._._*>, then press < :_>. The
Custom WB data will be registered
under the selected No.
,3
Semect [Record and register
image].
® Turn the <Q> dial to select [Record
and register image], then press
_y,, T he LCD monitor will turn off, and the
selected No. [ * ] will blink on the rear
LCD panel.
64