Installing And Removing The Battery - Canon EOS-1DS Mark III Instruction Manual

Installing and Removing the Battery
Installing the Battery
Load a fully charged LP-E4 battery pack into the camera.
Remove the battery compartment
cap.
_ Grasp both sides of the cap and puii it
out=
insert the battery.
_ Insert the battery firmly all the way,
and turn the release handle as shown
by the arrow.
Checking the 8artery LeveJ
When the power switch is set to <ON> (p=36), the battery level wiii be
indicated in one of six levels:
100 - 70 Sufficient battery level
69 - 50 Battery level exceeds 50%
49 - 20 Battery level below 50%
19 - 10 Battery level is low
_ 9 - 1 Battery will be exhausted soon
0 Recharge the battery
Select the [[_: Battery info.] menu to See the detailed battery information:
(P,!87)
29