The Memory - Canon EOS-1DS Mark III Instruction Manual

Installing and Removing the Memory Card
@
The access mamp lights during any of the following operations: The
image is being exposed, being written to or read by the memory card
being erased, or data is being transferred. While the access lamp ms
lit, never do any of the following. Doing so may damage the image
data. mtmay also damage the memory card or camera,
. Opening the card slot cover.
o Removing the battery.
Shaking or banging the camera around,
If the memory card already contains recorded images, the image numeer
might not start from 000% tR.797
Compared to other memory cards, hard disK-_ype cards are more
vulneraDJe _o vibration and physicai shock. If you use a SUCh a card. be
careful not to sueject the camera to vibration or Dnysicai shock especially
while recording or playing images.
When holding a hard disk-type card, always hold its sides. You may
damage the card by holding _tsflat surfaces.
Do not touch the SD card's contacts with your fingers or metal objects.
*$, Even with the sower switch set to <OFF>, when you insert or remove a
memory card. the access lamp might blink.
if a memory, card-related error is displayed, see page 48.
34