Protecting Photos - Canon VIXIA HFR11 Instruction Manual

2 Pause the playback at the point you want to capture.
3 Press _BI_] fully.
O IMPORTANT
* When capturing photos on an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also Usind an Eye-F/cam/(CCJ 128).
NOTES
* The data code of the photos will reflect the date and time of recording of
the original scene.
* Photos captured from a scene with a lot of fast movement may be
blurred.
* t_iD/_ Photos will be recorded on the memory selected for
recording photos.
Protecting Photos
You can protect photos from accidental erasure.
Operating modes:
Protecting Single Photos
1 In single photo view, open the photo selection screen.
:FO_Nc:] _
[_ Protect]
[_ Protect] appears on the screen.
2 Select (_-) the photo you want to protect.
3 Press _ to protect the photo.
appears on the bottom bar and the photo cannot be deleted. Press
again to remove the protection.
4 Repeat steps 2-3 to protect additional photos or press [FUNC:I
twice to close the menu.
96 * Photos