Canon VIXIA HFR11 Instruction Manual page 159

Some Oll p hotos could not be deleted
-Protected photos (Om ) cannot be d eleted. Remove the p rotection (L_[3 96).
Some scenes could not be added to the p laylist
-Scenes that were not recorded with this camcorder cannot be added to the p laylist.
-The playlist can contain amaximum of 9 99 scenes. If t he p laylist includes scenes recorded in
FXP mode, the m aximum number of s cenes in the p laylist may be less than 999. Delete some
scenes from t he p laylist (L_[3 80).
C_]iD/_ Some scenes could not be converted
-Among the s cenes selected for c onversion to SD t here are s cenes recorded with another
device using 24p frame rate. When converting scenes to riD, leave out scenes recorded using
another device.
Some scenes could not be deleted
-Movies that were protected/edited with other devices cannot be deleted with this c amcorder.
I_T'J_'II/HFdI_']_Somescenes were recorded using another device and cannot be copied.
- Scenesthat were not recordedwith this camcorder cannot be copiedto the memory card.
Task in progress. Donot disconnect the power source.
- The camcorder is updating the memory. Wait until the operation ends and do not disconnect
the compact power adapter or remove the battery pack.
This Oll photo could not be deleted
- Protected photos (O11 ) cannot bedeleted. Removethe protection (LT3 96).
_]_i]_/_ This memory card contains scenes. Delete all scenes to use relay recording.
- Savethe movies on the memory card (r._3 123) and initialize the memory card
( L_3 38).
This photo cannot be displayed
- Youmay not be able to display photostaken with other devices or image files created or
edited on a computer,
- The playlist can contain a maximum of 999 scenes,
This scene was recorded using another device and cannot be added to the playlist.
- Scenesthat were not recordedwith this camcorder cannot be addedto the playlist.
IIT, Jft"D/HFdl_'fil This scene was recorded using another device and cannot becopied.
- Scenesthat were not recordedwith this camcorder cannot be copiedto the memory card.
To use this function, switch out of _ mode
- Youpressed a button that cannot be used in _ mode. Press _ to set the camcorder
to flexible recording mode.
Too many photos. Disconnect the USB cable.
- Disconnectthe USBcable. Try using a memory card reader or decreasethe number of photos
on the memory card to fewer than 2,500 photos (for Windows and printers) or 1,000 photos
(for Mac OS). Disconnectthe USBcable, and restorethe connection after a short while.
Additional hformation * 159