Selecting Photosize And Quality - Canon VIXIA HFR11 Instruction Manual

O IMPORTANT
* Observe the following precautions while the ACCESS indicator isonor
flashing. Failing todoso may r esult inpermanent data loss.
- Do not o pen t he memory card slot cover.
- Do not d isconnect the power source or turn off t he camcorder.
- Do not c hange the camcorder's operating mode.
* When recording photos onanEye-Fi card, photos will b euploaded
automatically ifyou are within the range ofaconfigured network. Make
sure E ye-Fi cards are approved inthe country orregion ofuse.
See also
Usind an Eye-Fi card(LT3 128).
(_ NOTES
• You cannot take photos when _ _ ]Frame Rate] is set to [i_ PF30]
or [i$_t] PF24]. Also, you cannot take photos when digital zoom is acti-
vated (light blue and dark blue area on the zoom bar).
• When [_ @ [Flicker Reduction] is set to [_ 50 Hz] or [_]_ 60 Hz],
the camcorder will automatically adjust the shutter speed.
Selecting PhotoSize and Quality
Photos are recorded as JPG files. As a general rule, select a larger
photo size for higher quality. Select the [I._ 1920xl oeo] size for photos
with an aspect ratio of 16:9.
Operating modes:
Options
Photo size options and the approximate number of photos that can be
recorded on memory cards of various sizes are given in the following
table.
[L 600Xi 00
@ Desired photo size* @ [
Desired photo qua!ity* O _
* Press O to move back and forth betweensizeand quality selection.The number
displayedon the rightcorner indicatesthe approximatenumber of photos that can
be recorded with the current quality/sizesetting,
Photos •
87