Selecting The Video Quality(Recordingmode) - Canon VIXIA HFR11 Instruction Manual

• Be sure t osave y our recordings regularly (CI3 1 11 ),especially after mak-
ing important recordings. Canon shall not b eliable forany l oss o rcor-
ruption ofdata.
(_ NOTES
• Aboutthe PowerSave mode:If [_=1 _ [Power Saving Mode] is set to
[ _ On], the camcorder will shut off automatically to save power when
it is powered by a battery pack and is left without any operation for 5
minutes. Press
POWER]
to turn on the camcorder.
• When recording in bright places, it may be difficult to use the LCD
screen. In such cases, you can turn on the LCD backlight (CYD 26) or
adjust the brightness of the LCD screen with the [_°1 @ [LCD Bright-
ness] setting.
Selecting the Video Quality(RecordingMode)
The camcorder offers 4 recording modes. Changing the recording
mode will change the recording time available on the memory. Select
FXP or XP+ mode for better movie quality; select LP mode for longer
recording times. The following table gives approximate recording
times.
Operating modes:
IF__c:q @ [SP standard Play 7 Mbps] 0 Desired recording
mode @
(_) NOTES
• The camcorder uses a variable bit rate (VBR) to encode video so the
actual recording times will vary depending on the content of the scenes.
• The camcorder retains the last setting used even if you set the cam-
corder to ! mode.
Video • 41