Canon VIXIA HFR11 Instruction Manual page 77

(_) NOTES
* You can also add to the playlist just the video snapshot scenes you
want to watch and arrange their playback order.
* Initializing a memory card will permanently erase any music files you
may have transferred to the card. The music files that come pre-
installed in the built-in memory will be restored after it is initialized
(I]]_JD/G]_]# only).
* Windows users: Use the supplied software ImageMixer 3 SE to trans-
fer music files from the supplied Camcorder Supplemental Disc to the
memory card again. For details, refer to the 'lmageMixer 3 SE Software
Guide'.
* Mac OS users: Use the Finder to transfer music files from the [MUSIC]
folder on the supplied Camcorder Supplemental Disc to the memory
card after it is initialized. Refer to About the music f/Yes([_ 177) for the
folder structure of the memory card.
• I_iD/_i_ The Camcorder Supplemental Disc includes also extra
music tracks that were not pre-installed in the built-in memory.
• I_i]_/_ Transfer music files to the same memory that contains the
recordings you want to play back.
• When music files are transferred to the built-in memory (_]iD/_]_
only) or to a memory card after repeatedly recording and deleting
recordings (fragmented memory), the movies and background music
track may not be played back correctly. In such case, we recommend
saving your recordings on a computer (L7.3 111), initializing the memory
([Z3 38), transferring the music files and only then writing the video files
back to the camcorder.
• If the connection is interrupted while transferring music files, it may not
be possible to correctly play back those music tracks. Delete the music
tracks from the memory, and transfer the music files again.
• In some cases, the video playback may not be correctly linked to the
external player. For example, if the volume of external player is too low
or if the audio signal contains a lot of noise, etc.
• When you connect the MIC terminal to the audio outputs on the exter-
nal audio player and cannot adjust the strength of the signal, the cam-
corder will automatically lower the volume of the external audio if it is too
loud.
Video • 77