Canon VIXIA HFR11 Instruction Manual page 128

Uploading your Videos Wirelessly
If you are using an Eye-Fi card, you can automatically upload the mov-
ies from the [For Web (MPEG-2)] index screen to your favorite video
sharing Web site, You will need to have installed the software supplied
with your Eye-Fi card and completed all the required configuration
setup in advance. Refer to the instruction manual of the Eye-Fi card.
Please read the IMPORTANT section (E_ 128) before using an Eye-Fi
card,
1 Insert your Eye-Fi card in the camcorder and make sure there is
sufficient available space on the card.
2 Convert the desired movie (Lq3 125).
• When the conversion is completed, select [End Without Connecting]
and press (_).
• If you are within the range of a configured network, Web upload will
start automatically after the conversion is completed.
• The status of the wireless communication is shown by the Eye-Fi
icon as follows:
- _" (grayed out) Communication not established
- _" (white, flashing) Connecting; _" (white, continuously on)
Wireless upload on standby
- _" (animated) Wireless upload in progress
_" [Eye-Fi Communication] is set to [_ Off]
- OFf
- "_ Wireless upload stopped by the camcorder (EZ3152)
- "_ Error reading from the Eye-Fi card (C[3 150)
IMPORTANT
Using an Eye-Fi card:
* This product is not guaranteed to support Eye-Fi card functions (includ-
ing wireless transfer). In case of an issue with an Eye-Fi card, please
check with the card manufacturer. Also note that an approval is required
to use Eye-Fi cards in many countries or regions. Without approval, use
of the card is not permitted. If it is unclear whether the card has been
approved for use in the area, please check with the card manufacturer.
* Do not use Eye-Fi cards on airplanes and in other places where wireless
communication is forbidden. Remove the Eye-Fi card from the cam-
corder beforehand.
128
* External Connections