Protecting Photos - Canon VIXIA HF20 Instruction Manual

• mm
Photos will be recorded on the memory selected for recording
photos (OJ 42).
•
[~
Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of
[E
PF24]).
Protecting Photos
You can protect photos from accidental erasure.
'............................. ·• ......•...............w..........
I · · · · · . · · · · . · . · · . · . ·
··.w.••
Protecting Single Photos
([IJ
34)
1 In single photo view, open the photo selection screen.
[FUNC.]
€) [On Protect]
[lin Protect] appears on the screen.
2 Select (....
~)
the photo you want to protect.
3 Press
@
to protect the photo.
IOnI
appears on the bottom bar and the photo cannot be deleted. Press
@
again to remove the protection.
4 Repeat steps 2-3 to protect additional photos or press
(FUNC.]
twice to close the menu.
Protecting Photos from the Index Screen
Options
[Individual Photos]
Opens the same screen described in Protect-
ing Single Photos (OJ 104). Continue from step 3 of that proce-
dure to protect the photo.
[Selected Photos]
Protects all the photos selected in advance
(marked with a -/ checkmark). Refer to Pre-selecting Recordings
from the Index Screen (OJ 57).
[Remove All]
Removes the protection from all photos.
104.
Photos