Electrical Specifications; Grounding; Circuit Breaker; System Ac Power Specifications - HP rp7440 Service Manual

User service guide, fourth edition - hp integrity rx7640 and hp 9000 rp7440 servers
Hide thumbs Also See for rp7440:
Table of Contents

Advertisement

Table 2-3 Example Weight Summary (continued)
Component
DVD drive
Hard disk drive
Chassis with skins and
front bezel cover
Table 2-4 Weight Summary
Component
Cell Board
PCI Card
Power Supply (BPS)
DVD Drive
Hard Disk Drive
Chassis with skins and
front bezel cover

Electrical Specifications

This section provides electrical specifications for the server.

Grounding

The site building shall provide a safety ground and protective earth for each AC service entrance
to all cabinets.
Install a protective earthing (PE) conductor that is identical in size, insulation material, and
thickness to the branch-circuit supply conductors. The PE conductor must be green with yellow
stripes. The earthing conductor must be connected from the unit to the building installation earth
or if supplied by a separately derived system, at the supply transformer or motor-generator set
grounding point.

Circuit Breaker

The Marked Electrical for the server is 15 amps per line cord. The recommended circuit breaker
size is 20 amps for North America. For countries outside North America, consult your local
electrical authority having jurisdiction for the recommended circuit breaker size.
The server contains four C20 power receptacles located at the bottom rear bulkhead. A minimum
of two power cords must be used to maintain normal operation of the server. A second set of
two cords can be added to improve system availability by protecting, for example, against power
source failures or accidentally tripped circuit breakers. The server can receive AC input from
two different AC power sources.

System AC Power Specifications

Power Cords

Table 2-5
lists the various power cables available for use with the server. Each power cord is 15
feet (4.5 meters) in length with a IEC 60320-1 C19 female connector attached to one end.
36
Server Site Preparation
Quantity
1
4
1
Quantity
Multiply By
27.8 (12.16)
0.34 (0.153)
18 (8.2)
2.2 (1.0)
1.6 (0.73)
90.0 (41.0)
Total weight
Multiply
2.2 (1.0)
1.6 (0.73)
90.0(41.0)
Total weight
Weight (kg)
4.4 (2.0)
6.40 (2.90)
131.0 (59.42)
286.36 (129.89)
Weight (kg)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Integrity rx76409000 rp7440

Table of Contents