Shutting Down Microsoft Windows - HP rp7440 Service Manual

5. Exit the console and management processor interfaces if you are finished using them.
To exit the console environment, press ^B (Control+B); this exits the console and returns
to the management processor Main menu. To exit the management processor, enter X at the
Main menu.

Shutting Down Microsoft Windows

You can shut down the Windows OS on HP Integrity servers using the Start menu or the
shutdown command.
CAUTION:
or shutdown commands under normal circumstances.
Issuing restart or shutdown at the SAC> prompt causes the system to restart or shut down
immediately and can result in the loss of data.
Instead, use the Windows Start menu or the shutdown command to shut down without loss of
data.
To shut down Windows use either of the following methods.
• Select Shut Down from the Start menu, and select either Restart or Shut down from the
drop-down menu.
Selecting the Restart menu item shuts down and restarts the system. Selecting the Shut
down menu item shuts down the system.
You can use this method when using the Windows graphical interface.
• Issue the shutdown command from the Windows command line.
Refer to the procedure
You can issue this command from a command prompt through the Special Administration
Console (SAC) or from any other command line.
The Windows shutdown command includes the following options:
/s
/r
/a
/t xxx
Refer to the help shutdown Windows command for details.
NOTE:
On HP rx7620, rx7640, rx8620, and rx8640 servers, performing a shutdown using
shutdown /s (or the equivalent Start >Shut Down, Shut down) powers off the server cabinet
or powers off the cells and I/O chassis assigned to the nPartition. You can customize this behavior.
For details, refer to
On HP Integrity Superdome servers, the Windows shutdown /s command shuts down the
system and keeps all cells at the boot-is-blocked (BIB) inactive state.
Procedure 4-16 Windows Shutdown from the Command Line
From the Windows command line, issue the shutdown command to shut down the OS.
1. Log in to Windows running on the system that you want to shut down.
For example, access the system console and use the Windows SAC interface to start a
command prompt, from which you can issue Windows commands to shut down the the
system.
Do not shut down Windows using Special Administration Console (SAC) restart
"Windows Shutdown from the Command Line" (page 113)
Shut down the system. This is the equivalent of Start >Shut Down, Shut down.
Shut down and restart the system. This is the equivalent of Start >Shut Down,
Restart.
Abort a system shutdown.
Set the timeout period before shutdown to xxx seconds. The timeout period can
range from 0–600, with a default of 30.
"ACPI Softpowerdown Configuration—OS Shutdown Behavior" (page
Booting and Shutting Down Microsoft Windows
for details.
92).
113