2.
Cut and join them together (as necessary) to create a scale model floor plan of your computer
room.
3.
Remove a copy of each applicable equipment footprint template.
4.
Cut out each template selected in step 3; then place it on the floor plan grid created in step
2.
5.
Position pieces until the desired layout is obtained; then fasten the pieces to the grid. Mark
locations of computer room doors, air-conditioning floor vents, utility outlets, and so on.
NOTE:
Attach a reduced copy of the completed floor plan to the site survey. HP installation
specialists use this floor plan during equipment installation.
Figure C-2 Server Cabinet Template
190
Templates