Hp Integrity Rx7640 Server And Hp 9000 Rp7440 Server Overview; Detailed Server Description - HP rp7440 Service Manual

1 HP Integrity rx7640 Server and HP 9000 rp7440 Server
Overview
The HP Integrity rx7640 and HP 9000 rp7440 Servers are members of HP's business-critical
computing platform family in the mid-range product line.
The information in chapters one through six of this guide applies to the HP Integrity rx7640 and
HP 9000 rp7440 Servers, except for a few items specifically denoted as applying only to the HP
Integrity rx7640 Server. Chapter seven covers any information specific to the HP 9000 rp7440
Server only.
IMPORTANT:
servers. This step is vital when performing upgrades and is recommended for existing hardware
service restoration. Specific information for upgrades is found in the Upgrade Guide, Mid-Range
Two-Cell HP Servers to HP Integrity rx7640 Server, located at the following
URL:http://docs.fc.hp.com.
The server is a 10U
server. Features of the server include:
• Up to 256 GB of physical memory provided by dual inline memory modules (DIMMs).
• Dual-core processors.
• Up to 16 processors with a maximum of 4 processor modules per cell board and a maximum
of 2 cell boards.
• One cell controller (CC) per cell board.
• Turbo fans to cool CPUs and CCs on the cell boards.
• Up to four embedded hard disk drives.
• One half-height DVD drive, two slimline DVDs or one DAT drive.
• Two front chassis mounted N+1 fans.
• Two rear chassis mounted N+1 fans.
• Six N+1 PCI-X card cage fans.
• Two N+1 bulk power supplies.
• N+1 hot-swappable system oscillators.
• Sixteen PCI slots divided into two IO Chassis each. Each IO Chassis accommodates eight
slots supporting PCI/PCI-X/PCI-X 2.0 device adapters or four PCI/PCI-X/PCI-X 2.0 and four
PCIe device adapters.
• Up to two core I/O card sets.
• One manageability processor per core I/O card with failover capability when two or more
core I/O cards are installed and properly configured.
• Four 220 V AC power plugs. Two are required and the other two provide power source
redundancy.

Detailed Server Description

The following section provides detailed information about the server components.
1. The U is a unit of measurement specifying product height. One U is equal to 1.75 inches.
Ensure a valid UUID is either in place or available prior to maintenance of these
1
high, 8-socket symmetric multiprocessor (SMP) rack-mount or standalone
Detailed Server Description 19