Selectype Tutorial - Epson 1000 Reference Manual

SelecType tutorial

1. Note that the first thing you will see on the display before
entering SelecType is:
READY
For the ActionLaser 1500, you will see READY:P 3/P/Si.
Make a note of the interface channel, for example,
P=parallel. You may need this information later.
2. Press the LEVEL1 button to enter SelecType Level 1.
3. The main menu option appears. The b icon indicates that
you can enter the submenu by pressing
the display also shows the current setting, as shown below.
4. Enter the options submenu by pressing ) .
INPUT + AUTO
5. Display the other submenu options by pressing A or v .
INPUT
right, b SET, indicates you can select the option displayed
by pressing b .
: P LJ-2P
AUTO LT
L T b S E T
. In many cases,
SelecType 4-5