Table of Contents
Advertisement
STANDBY XXX [S]
When the STANDBY menu is set to ENABLE, the printer enters
the standby mode if it is not used for about thirty minutes.
Press any panel button or send data to warm up the printer.
STARTUP ERROR [E]
To clear this error, press 4 to select LT paper. WAIT appears as
the printer returns to its default settings.
TRAY SET (paper source) (paper size) [E]
The paper size setting does not match the paper loaded in the
specified paper source. The right column of the display
indicates the expected paper size and the currently selected
paper source. You can either change the paper size setting or
load the correct paper size. After you correct the paper
mismatch, press CONTINUE.
WAIT [S]
The printer is being reset after a STARTUP ERROR.
WARMING UP [S]
The printer is warming up. The amount of toner left in the
imaging cartridge is also displayed. For example: A full toner
amount is E*****F.
3-26
Troubleshooting
Advertisement
Table of Contents
