Standby; : Status Sheet; Sub Config - Epson 1000 Reference Manual

STANDBY

This Level 2 option saves power by reducing the power to
the fusing heater whenever no data is sent to the printer for
30 minutes. In this mode, the printer begins warming up as
soon as you press the ON LINE button or send any data; it
becomes ready to print within 35 seconds. The default is
DISABLE, which keeps the printer warmed up and ready to
print at all times.
Menu/submenu
STATUS SHEET
This Level 1 option prints a status sheet that lists the current
printer settings. When you reach this option, press b twice to
print the status sheet.
Menu/submenu
If you want the status sheet to reflect a macro, first load the
macro using the LOAD MACRO option in Level 1 SYSTEM
CONFIG. Then print the status sheet.

SUB CONFIG.

The submenu for the Level 1 SUB CONFIG. option is different
in each printer emulation. It controls such features as symbol
set and number of text lines. See Appendixes B and C in this
Reference Guide for information on the printer emulation you
are using.
Available options
DISABLE
Available options
SelecType 4-25