Lang; Macro - Epson 1000 Reference Manual

CTS-When CTS (Clear To Send) is OFF, the signal level is
permanently set HIGH. The factory setting is OFF (signal level
is HIGH). This setting should be set to OFF for most
communications purposes. When CTS is ON, data is sent to the
computer only when CTS is HIGH.
Menu/submenu

LANG.

Use this Level 2 option to select the language used in the status
and error display messages. This manual describes all status
and error messages in English only.
Menu/submenu

MACRO

These Level 1 options are found on the SYSTEM CONFIG.
submenu.
SAVE MACRO-Use this option to save the current Level 1
settings as a macro and recall them anytime. You can save up
to four macros using the numbers 1 through 4. When you
press k , the following appears on the display:
Menu/submenu
S A V E M A C R O +l b E X E 1 t o 4
4-18 SelecType
OFF
E N G L I S H b E N G L I S H
Available options
Available options
DEUTSCH
ITALIANO
ESPANOL
FRANCAIS
Available options