Epson 1000 Reference Manual page 103

Select a macro number for your setting by pressing A or v .
Then press F to save the current SelecType Level
the macro. Next use the PowerOn MACRO option, described
later in this MACRO section, to choose the same number as
chosen in SAVE MACRO. These settings will be in effect each
time you turn the printer on.
Press 4 to exit this submenu without saving a macro.
CAUTION:
Do not turn off the printer while it is saving the macro. If you
do, you may see a
you turn the printer on.
You can save up to four different settings for each emulation
except PostScript.
LOAD MACRO-Use this option to load one of the macros you
created using the SAVE MACRO option. The factory setting
is 1. When you press b , the following appears on the display:
Menu/submenu
L O A D M A C R O +l b E X E 0 t o 4
Press A or v to choose the number of the macro you want to
use. Then press b to load the selected macro. Whenever you
select macro 0, all Level 1 settings return to their factory
settings. Press 4 to exit this submenu without loading a macro.
Note:
You can create customized Level 1 settings (macros) and save them in
the printer. The printer can memorize up to four series of macros for
each emulation. If you change the Level 1 settings and save them to
one of the macros in advance, you can later use your customized
macros whenever you load the corresponding macro number.
message the next time
START UP ERROR
Available options
settings into
1
SelecType 4-19