Removing A Card - Epson 1000 Reference Manual

CAUTION:
If the message REMOVE CARD appears on the display,
you inserted the card when the printer was on line or
when the printer's memory contained data. Remove the
card, press CONTINUE, then return to step 1.
4. If the power is on, press ON LINE to set the printer on line. If
the power is off, turn on the printer.
CAUTION:
If the message ILLEGAL CARD appears on the display, repeat
steps 1 through 4.
If you are using an identity card, you can select the emulation
that the card offers. See the card's manual for more information.
If you are using a font card, see Appendixes B and C for
information on selecting fonts.

Removing a card

1. If you are using an identity card, turn off the printer. If you
are using a font card, set the printer off line. (If the FEED
light is on, press FEED to print out any data before you
remove the card.)
CAUTION:
Never
is on.
2. Grasp the card at the center and gently pull it straight out of
the slot.
an identity card when the printer's power
remove
Options 5-9