Specifications; Packaged Parts - NEC NP-UM330W Installation Manual

Warning
• Do not install in places subject to constant vibra-
tion. Extended vibration may cause loosening of the
screws and result in the Wall Mount Unit and pro-
jector falling and causing injury. Also, it may cause
breakdown of the projector.
• To ensure safety, be sure to tighten the bolts, screws
and safety lock screws securely. Failure to do so may
result in the projector falling and causing injury.
• Do not modify any parts. Doing so may result in the
projector and the Wall Mount Unit falling and caus-
ing injury.
• Do not use broken parts. Doing so may result in the
projector and the Wall Mount Unit falling and caus-
ing injury. If a part should break, consult your dealer.
• Do not look into the projection window, mirror or
lens when the projector is turned on. Doing so could
damage your eyesight.
• Do not hang from the projector and the Wall Mount
Unit. Doing so may result in the projector and the
Wall Mount Unit falling and causing injury. Be espe-
cially careful of children.
• Do not use adhesive for the locking screws, lubricant
agent, oil and so on for the wall adapter. Doing so
may cause the material of the wall adapter to dete-
riorate and result in the projector falling and causing
injury.
• Do not obstruct the projector's ventilation holes. Do-
ing so will prevent the dissipation of heat and may
result in fire. In particular, do not use the projector in
the following ways:
installing the projector in a place such as wall and so
on where ventilation is poor, covering it, etc.
• Do not install the projector in front of the outlets of
an air conditioner or heater or in a place exposed to
significant vibrations. Doing so may result in fires and
electric shock.
• Do not install the projector in humid or dusty places
or those exposed to greasy smoke or steam (such as
near cooking equipment or humidifiers). Doing so
may result in fires.
• When installing the projector, leave sufficient space
between it and surrounding objects. Failure to do so
will prevent the dissipation of heat and may result in
fires.
Please:
• Avoid rooms with significant dust, humidity, greasy smoke, or
tobacco smoke.
Dirt will adhere to the optical parts such as mirrors and lens-
es, which will cause image quality to deteriorate.
• Avoid places in which the screen is exposed to direct sunlight
or illuminated light.
When surrounding light directly hits the screen, the image
appears washed out and is difficult to view.
• Avoid locations exposed to particularly high or low tempera-
tures.
Doing so may result in breakdown. (For the ambient operat-
ing temperature, see the user's manual included with the
projector.)
Caution

Packaged Parts

Check that the parts below are included in the package.

Specifications

Product name : Wall mount unit
Model name : NP04WK
Adjustable angles : Vertical angle – ±5°; Horizontal angle – ±5°;
Tilt angle – ±5°
Adjustable positions : Front/back – 422; Horizontal – ±50 mm; Ver-
tical – ±40 mm
External dimensions : 530 (W) x 572 (D) x 223 (H) mm
(NP04WK1; 530 (W) x 575 (D) x 223 (H) mm)
Weight : Approx. 9.3 kg (NP04KW1: 11.2 kg)
Load capacity : 7.0 kg
These specifications and the design are subject to change without
notice.
3
Wall adapter: 1 set
Slide arm: 1 set
Wall adapter covers: 2
M4×8 mm screws: 4
Washers: 4
Spacers: 4
Wall plate: 1
(NP04WK1 only)
M6×10 mm screws: 4
(NP04WK1 only)
Hexagonal wrench: 1
Cautions on
Installation: 1
Quick Install Guide: 1