NEC DISPLAY SOLUTIONS OF AMERICA, INC.
The Lightweight Adjustable Suspended Ceiling Plate
allows a projector to be mounted above a 2' x 2' or 2' x 4'
false ceiling tile. It offers unlimited adjustability and projector
mount placement anywhere within a standard ceiling grid.
It can be used with or without an extension column and
offers two electrical knockouts. It is specifically designed
for projectors and offers a low-profile, secure solution to
complement sleek, lightweight projectors.
• Includes Kwik-LocTM self locking cable joiners for simple
cable support set-up
• Unlimited projector placement above a 2' x 2' or 2' x 4'
standard ceiling tile
• Escutcheon ring included for a clean finish
Pre-assembled, easy to install design reduces installation
• Compact, lightweight, theft resistant design
• Fixed and Adjustable length Extension Columns, 1 1/2"
NPT ("EXT" or "AEC" models)
• Fixed length Extension Columns, 3/4" NPT (FLP Series)*
*Must be used in conjunction with an ACC 913,
Pipe Reducer (2 may be required)
5.2 lb (2.3 kg)
6.6 lb (2.99 kg)
Maximum Load Capacity:
60 lb (27.2 kg)
Shipping Carton dimensions:
L = 26.25 in (667 mm)
W = 13.5 in (343 mm)
H = 1.88 in (48 mm)
The Lightweight Adjustable Suspended Ceiling Plate shall be a NEC model
shall contain an adjustable collar mount plate with a 1 1/2-11.5 NPS center threaded fitting and holes for outlet boxes (Raco 445 or Appleton 383
recommended) and antenna leads. It shall feature a tie wire support system to transfer the load to four attachment points (in the true ceiling above)
with turnbuckles to fine tune the level of the ceiling tray. The finish shall be white fused epoxy. Assembly and installation shall be done according to
instructions provided by the manufacturer.
Peerless Industries, Inc.
2300 White Oak Circle. Aurora, IL 60502
708-865-8870 800-865-2112 Fax 708-865-2941
TECHNICAL DATA SHEET Lightweight
Adjustable Suspended Ceiling Plate
A R C H I T E C T S S P E C I F I C A T I O N S
All other brand and product names are trademarks or registered trademarks of their respective own-
and shall be located where indicated on the plans. It
ISSUED: 01-11-11 SHEET NO: 120-9546-1
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
page 1 of 2