These specifications and the design are subject to change without notice.
Using the wall plate
When attaching the wall adapter using the wall plate, make 16 holes in the wall at the posi-
tions indicated below. Make holes with the proper depth and diameter for the screws to be
Dimensional drawing for screw positions (units: mm)
(1) Attach the included wall plate to a vertical member in the wall using screws (or bolts) (in
(2) Securely fasten the wall adapter to the wall plate using the included screws (M6×10),
spacers and washers (4 locations). For cautions, etc., see page ENG-8.
: Wall mount unit
: Vertical angle – ±5°; Horizontal angle – ±5°; Tilt angle – ±5°
: Front/back – 422; Horizontal – ±50 mm; Vertical – ±40 mm
: 530 (W) x 942 (D) x 223 (H) mm (NP05WK1; 530 (W) x 945 (D) x 223 (H) mm)
: Approx. 13.7 kg (NP05WK1: 15.5 kg)
: 5.0 kg
Wall adapter mount screw hole
Wall mount hole