Table of Contents
Advertisement
1-18
|
Setting Up the Printer
Note
To avoid unnecessary
spooling, background
printing should be turned
off for all client
computers.
4. Check
Share this Printer
password information as needed.
5. Click
. The name of the shared printer appears in the port list in the
OK
Chooser.
6. Close the Chooser.
Configuring the Client Macintosh Computers
Perform these steps on every Macintosh that will need to access the printer:
1. Open the Chooser, click the printer's icon, and then select the shared
printer name on the right. You can only select from the printers
connected to your current AppleTalk zone.
2. If you're prompted for a password, enter the password for the printer
and click
.
OK
3. Make sure
Background Printing
For instructions on using your printer software, see Chapter 3.
1-18
, then type a name for the printer and
is turned off. Then close the Chooser.
Advertisement
Table of Contents
