Epson StylusPro10000 Printer Manual page 32

1-14 | Setting Up the Printer
Note
If you're on an AppleTalk
network and the
AppleTalk setting in the
Chooser is Active, you
may see an alert
message when you click
the USB port icon. Make
the AppleTalk setting
Inactive, then select the
USB port icon. If you're
using your Macintosh in
an Ethernet environment,
you can leave the
AppleTalk setting Active.
SPro 10000 identifies
the driver for the
Photographic Dye
Ink model, and SPro
10000CF identifies the
driver for the Archival
Ink model.
5. At the first screen, click
6. Click the button, then click
Install
7. Follow the instructions to install your software and select a default paper
size. When you see a message informing you that installation is
complete, click
Restart
8. After your Macintosh restarts, select
If you're going to be sharing the printer on an AppleTalk
the rest of these steps. Instead see "Setting Up on a Macintosh Network"
on page 1-17 to finish configuring the printer.
9. Click the
SPro 10000
your USB port.
1-14
. The following dialog box appears:
Continue
Continue
to restart your Macintosh.
Chooser
or icon, then click the icon for
SPro 10000CF
on the next screen.
from the Apple menu.
®
network, skip