Epson Apex 20020, 20040 User Manual page 38

When the diskette is in all the way, turn the latch down
(clockwise) to lock the diskette in place.
Press any key. The DISKCOPY program copies the
4.
contents of the Startup diskette to the computer's memory,
and then you see the following:
Insert TARGET diskette in drive A:
Press any key when ready . . .
5. Remove the Startup diskette and insert a blank diskette
(which is to be the target diskette) in drive A. Then press
any key.
If the diskette is not formatted, the DISKCOPY program
formats it. Then the program begins copying the data from
the computer's memory to the formatted diskette. When
the copy is complete, you see this prompt:
Copy another diskette (Y/N)?
6. Press Y so you can make a copy of the Operating 1 diskette.
Again, you see the prompt to insert the source diskette.
Remove the copy of the Startup diskette which you just
7.
made and insert the Operating 1 diskette into drive A.
Then press any key. Follow the prompts on the screen to
make a copy of this diskette as you did for the Startup
diskette.
8. Repeat the procedure to copy the Operating 2 diskette.
9.
Repeat the procedure to copy the Reference diskette.
10. When you finish copying the last diskette and the
Copy another diskette (Y/N)?
appears, press
prompt
C
to return to the MS-DOS command
N
: \>.
prompt