Epson Apex 20020, 20040 User Manual page 193

When you select option 14 from the DEVICE LIST, you see
this prompt:
I s d o t - m a t r i x p r i n t e r o n - l i n e
Check that your printer is connected to the computer, and that
it is turned on, loaded with paper, and on-line. Press Y and
then to continue, or press
Enter
menu.
When you continue the test, the computer checks that the
printer is responding correctly. This test detects whether the
printer is off-line or whether an interface error exists. If no
errors occur, the computer sends a repeating sequence of
characters and bit-image data to the printer until you press any
key. The pattern looks like this:
The text data includes all the characters commonly used by
programs that require foreign languages or graphic characters. If
your printer prints different characters than you see in the
illustration, some printed characters may not be what you
expect with certain software.
The bit-image data is sent to the printer using a command
(ESC K) compatible with Epson and IBM printers. If this
pattern is printed correctly, you can use the MS-DOS
GRAPHICS program to print out copies of graphics screens.
Note
Even if the test runs only for a short time, your printer may
store many characters in its buffer. To stop printing, ,set the
printer off-line.
and
N Enter
Performing System, Diagnostics
( Y / N ) ?
to return to the
C-29