Epson Apex 20020, 20040 User Manual page 112

Use the cursor keys to move the highlighted bar. To select a
file or directory, use the arrow keys to highlight the name of
the file or directory. Press
from the directory (top) window to the file (bottom) window.
Press to expand the file window, and then press it again
Enter
to return to the directory window.
Letter keys execute XTREE commands. The available XTREE
commands appear on the DIR COMMANDS or FILE
COMMANDS line at the bottom of your screen. The
highlighted letter of the word (the D in Delete, for example)
indicates the key you press to execute the command.
To execute a command on more than one file or directory,
press T to tag the desired files or directories with the Tag
command. A diamond appears next to each tagged file or
directory name. Then hold down the
highlighted letter of the command name. Pressing
example, deletes all tagged files.
key commands execute additional XTREE commands. Press
Alt
the key to display the ALT DIR COMMANDS or ALT
Alt
FILE COMMANDS. These commands appear on the line
where the DIR COMMANDS or FILE COMMANDS
normally appear. To execute an
the key and press the highlighted letter of the command
Alt
name.
Function keys control XTREE itself. Press
F2 to display a screen of help information, or F3 to cancel a
command. XTREE displays the available commands and the
key that executes each command on the lower right comer of
your screen.
There are many ways you can put XTREE to work. All disk
setup and maintenance functions can benefit from this utility.
You can add XTREE to batch files like any other MS-DOS
command-you could even put it in an AUTOEXEC.BAT file
to display a disk's file structure when you turn on the computer.
to move the highlighted bar
Enter
Ctrl
key command, hold down
Alt
key as you press the
Ctrl D,
to quit XTREE,
F1
for