Hard Disk Problems - Epson Apex 20020, 20040 User Manual

Hard Disk Problems

If you are having problems with your hard disk, try the
following steps:
1. If the drive is making loud noises, or not functioning at all,
do not attempt any further examination of it. Instead,
contact your nearest Epson Customer Care Center.
2. If this is the first time you have used the computer after
setting it up and the hard disk does not load MS-DOS
when you turn it on, it may be missing one of the MS-DOS
system files. Turn off your computer and insert your
working copy of the Startup diskette into drive A. Then
turn your computer on again. Press
the date and time prompts.
Type
C
this works, the next step is to make sure the file
COMMAND.COM is in the root directory of the hard
disk. Type
If COMMAND.COM exists in the root directory, use the
MS-DOS COMPARE command to compare the
COMMAND.COM file on your diskette with the
COMMAND.COM file on the hard disk. (See your
MS-DOS Reference Manual for instructions on using
COMPARE.) If the files do not match, use the COPY
command to replace COMMAND.COM on the hard disk
with the COMMAND.COM file on your diskette. Type
the following and press
COPY A:COMMAND.COM C:
3 If the hard disk still does not work, the root directory of
your hard disk may be missing some hidden system files.
(Hidden files are not displayed when you list files using the
DIR command.)
: and press
Enter
and press
DIR
Enter:
Enter
to log onto the hard disk. If
Enter.
Troubleshooting 6-9
twice to accept