Freezing The Image; Hiding The Image - BenQ DX832UST User Manual

8. A confirmation message appears. Highlight Yes and press ENTER on the projector
or remote control to confirm. You will see the message "Timer is On" displaying
on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight
Off. Press ENTER. A confirmation message appears.
2. Highlight Yes and press ENTER to confirm. You will see the message "Timer is
Off" displaying on the screen.

Freezing the image

Press FREEZE on the remote control to freeze the image. The word "FREEZE" will
display in the upper left corner of the screen. To release the function, press any key on the
projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen onscreen.

Hiding the image

In order to draw the audience's full attention to the presenter, you press ECO BLANK
to hide the screen image. When this function is activated with an audio input connected,
the audio can still be heard.
You can set the blank time in the
Blank Timer
time when there is no action taken on the blank screen.
If the preset time spans are not suitable for your presentation, select Disable.
Blank Timer
No matter
projector or remote control to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to become heated and
deformed or even cause a fire.
SYSTEM SETUP: Basic > Operation Settings >
menu to let the projector return the image automatically after a period of
is activated or not, you can press most of the keys on the
Operation 31