Correcting Keystone - BenQ W2000+ User Manual

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the top or
bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you may correct this manually in ONE of
these ways:
•
Use the remote control
Press KEYSTONE to display the 2D Keystone window.
•
Using the projector
Press / or
The illustrations below show how to correct keystone distortion:
use or /
/
use or
26 Operation
/ to display the 2D Keystone window.
use or /
/
use or
•
To correct keystoning at the top of the image, use
or / .
•
To correct keystoning at the bottom of the image,
use or / .
•
To correct keystoning at the right side of the image,
use or / .
•
To correct keystoning at the left side of the image,
use or .
•
To reset the keystone values, press BACK for 2
seconds.
•
To enable the vertical Auto Keystone function, press
OK for 2 seconds.
When done, press BACK to save your changes and exit.