Resuming From An Error - Epson 20 User Manual

Press Y and
Enter
error, or press
N
You see this prompt:
How many times
Type the number of times you wish to repeat the test, then press
The tests for the device now start.
Enter.

Resuming From an Error

If an error occurs during a test, the test stops at that point, and an
error code and error message appear. If you want to record the
problem, you can print out the message on your printer. You see this
prompt:
Do you want a printout of the error message(s)
(Y/N)?
To continue without printing the error message, press
Before you request a printout, be sure your printer is turned on and
online, and the paper is installed correctly. Then press Y and
If the printer is not ready, the following message and prompt appear:
Printer is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the problem and press Y and
press and
N Enter
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to return to
the menu.
The program continues after an error in one of the following ways:
It returns to the DEVICE LIST, or
l
If you are running multiple tests and are not terminating on an
l
error, the program repeats the test that caused the error.
C-6 Performing System Diagnostics
to terminate checking if the device produces an
and to repeat the tests regardless of an error.
Enter
(1-9999):
to cancel printing.
N
to continue printing, or
Enter
and
Enter.
Enter.