S Series Recumbent Bike Assembly And Setup - Star Trac Fitness S-UBx Owner's Manual

S SERIES RECUMBENT BIKE
ASSEMBLY AND SETUP
Use the following procedures to unpack and assemble your STAR TRAC S-
RB / S-RBx RECUMBENT BIKE.
U
NPACKING
NOTE: Complete unpacking instructions are printed on the side of
the shipping carton.
Turn the shipping carton upside-down, and fully open all four
flaps on the bottom of the carton.
Turn the shipping carton right-side up, then lift the carton off of
the foam inserts. Remove all parts and foam inserts, and verify that the following parts are included in your shipment:
Description
Bike Frame
Display Console Assembly
Seat Frame Assembly
Front Foot
Rear Foot
Pedals (set of two)
Screw, Button Head, M10 X 30
Screw, Flat Head, M6 X 16
Screw, Socket Head, M6 X 20
T R
OOLS EQUIRED
Most STAR TRAC bikes can be assembled using the following tools:
Metric Hex Key Wrenches
n
Metric Open-End Wrenches
n
Metric Ratchet Socket Wrench Set
n
Torque Wrench
n
Your STAR TRAC S-RB / S-RBx RECUMBENT BIKE includes a hex key set and combination open-end wrench.
A
SSEMBLY
1. Install the Front Foot
NOTE: The front foot assembly has wheels attached to the front
edge. Be sure the wheels face forward when installing the front foot
assembly.
STAR TRAC S SERIES BIKES O
Qty
1
1
1
1
1
1
8
4
4
' M
WNER S ANUAL
Channel Lock Pliers
n
Vice Grip Pliers
n
Rubber Mallet
n
Phillips Head Screwdriver
n
15