Epson Y16499100301 User Manual page 42

The cursor block is on the
the speed of communication, press
the following:
110 bps
150 bps
bps
300
bps
600
1200 bps
bps
2400
bps
4800
9600 bps
19200 bps
bps
38400
Use 1 and t to move the cursor block to the desired
communication speed and press
To set the type of parity check, press 1 to select
and press
Enter.
None
Odd
Even
Use the arrow keys to move the cursor block to the correct
type of parity check and press
To change the data length, move the cursor block to
Data length
and press
or 8, whichever was not displayed before. Press
you want to reselect the previous number.
To change the number of stop bits, move the cursor block
to Stop bits and press
or 2, whichever was not displayed before. To reselect the
previous number, press
When you finish changing the serial port settings, move the
cursor block to the
press
Enter.
Setting Up Your System
Baud rate
Enter.
The screen displays the following:
Enter.
The number changes to either 7
Enter.
The number changes to either 1
Enter.
again.
Enter
* * * SAVE SETTINGS
option. To change
The screen displays
Enter.
Enter
* * * option and
Parity
again if
1-27