Setting The Real-Time Clock - Epson Y16499100301 User Manual

and press
Enter.
Exit
Real-time clock
Backlight period
Primary serial port
Secondary serial port

Setting the real-time clock

Your computer automatically keeps track of the time and
date using a real-time clock. Because the clock is backed up by
a separate battery, it keeps track of the time and date even
while the computer is turned off.
The MS-DOS TIME and DATE commands, as well as
many application programs, display the time and date held in
the clock, but they cannot make permanent changes to the
time and date settings.
Use the Real-time clock option if you need to change the
time and date permanently-for daylight saving time, for
example. Your computer automatically adjusts for leap years.
Note that even though MS-DOS and your application
programs may use a different format, the real-time clock uses a
24-hour time format to store the time.
To set the real-time clock, follow these steps:
1. On the main menu, press 1 to move the cursor block to
Real-time clock and press
date displayed like this:
1 7 : 4 5 : 5 5
1 2 - 3 1 - 1 9 8 7
2. To set the time, press
Time). You see the following:
hh:mm:ss
Setting Up Your System
The Setup menu displays on the screen:
exit program
Enter
Enter.
Time
Date
Enter
You see the time and
(while the cursor block is on
1-23