Table of Contents
Advertisement
Appendix B
Troubleshooting
You should not encounter any serious difficulties as you set
up and use your Equity LT. But if anything out of the
ordinary happens, read this appendix. Usually, such a situation
requires nothing more than adjusting a cable connection,
repeating a software procedure, or resetting the computer.
You can use the suggestions here to solve most problems
you may encounter. If you suspect there is a problem with some
part of your hardware, try running some or all of the system
diagnostics, described in Appendix D. If you cannot resolve the
problem, consult an Epson dealer about servicing the computer.
WARNING
If you need to turn off the computer for any reason, always
wait at least five seconds before you turn it back on. You can
damage the Equity LT if you turn it off and on rapidly.
Error Messages
If the screen displays an error message during the power-on
diagnostics, see Appendix C. If the screen displays an error
message while you are running system diagnostics, described in
Appendix D, check the error message table at the end of that
appendix for the cause. Then give the information to your
Epson dealer.
The Computer Fails to Start Up
If the computer does not start up when you turn on the
power switch, follow these steps to find a solution:
1.
Check to see if the power light above the keyboard is on. If
it is not, remove any diskettes and then turn off the power.
Wait five seconds, then turn the power back on.
Troubleshooting
Advertisement
Table of Contents
