System Problems - Gateway E-4400 System Manual

System problems

The system will not start up
Probable Cause
The system is not
connected to an AC
outlet.
The Voltage selection
switch is not set
correctly.
The system is non-responsive
Probable Cause
An error occurs during
an application or your
system may be out of
memory.
The keyboard does not work
Probable Cause
A key was depressed
while the system was
starting up.
The keyboard is not
plugged in or connected
properly.
Something spilled into
the keyboard.
The keyboard is
defective.
Solution
Check the power cable(s), then verify
connection to an AC power source.
Make sure the voltage selection switch is set
to the correct power source.
Solution
Restart your computer by pressing the reset
button. If the system is still non-responsive,
press and hold in the power button for 4
seconds to turn the system off. Turn the
system back on, then follow the on-screen
instructions.
Solution
Clear the sticking key, then turn off the system,
wait for a few seconds, then turn the system
back on.
Check the cable. Make sure it is plugged in
correctly.
Turn off the system. Turn the keyboard upside
down to let it dry before using the keyboard
again.
Try a keyboard you know is working.
System problems
81