Filter Counter; Warning Log; Factory Default - Panasonic PT-TW230EA Operating Instructions Manual

Filter counter

This function is used to set a frequency for the filter
replacement.
1 ) Press ▲▼ to select [Filter counter].
2 ) Press ►or the <ENTER> button to
access the submenu items.

Filter counter

J
Show the total accumulated time of the filter use timer
setting.
Timer
J
To set a timer. When the projector reaches the
selected time the filter warning icon appears on the
screen.
1 ) Press ▲▼ to select [Timer] and then
press the <ENTER> button .
2 ) Press ▲▼ to set the Timer.
Select from [Off/1000H/2000H/3000H/4000H]
z
depending on the use environment.
Filter counter reset
J
After replacing the filter, be sure to reset the timer.
1 ) Press ▲▼ to select [Filter counter
reset].
2 ) Press the <ENTER> button.
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another confirmation dialog
box appears, select [Yes] to reset the [Filter
counter].

Warning log

This function records anomalous operations while the
projector is in operation and use it when diagnosing
faults.
1 ) Press ▲▼ to select [Warning log].
2 ) Press ► or the <ENTER> button to
display the latest warning message.
Up to 10 warning logs are displayed with the
z
latest warning message at the top of the list,
followed by previous warning messages in
chronological order.
Attention
When the [Factory default] function is executed, all
z
the warning log records will be deleted.

Factory default

This function returns all setting values except for the
[PIN code lock], [Logo PIN code lock], [Lamp runtime],
[Filter counter] and the logo transferred by "Logo
Transfer Software" to the factory default settings.
1 ) Press ▲▼ to select [Factory default].
2 ) Press the <ENTER> button.
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another confirmation dialog
box appears, select [Yes] to return to [Factory
default].
Setting
57
ENGLISH -