Led Worklight - Craftsman 320.29004 Operator's Manual

HAMMER MODE (Fig. 11a)
To select hammer mode, rotate the torque
adjustment ring until the hammer icon_ is
aligned with the torque indicator, and clicks into
position.
LED WORKLIGHT (Fig, 12)
The LED worklight located on the base of the
drill will come on when the trigger switch is
depressed. The LED worklight will turn off when
the trigger switch is released. This provides
additional lighting on the surface of the
workpiece for operation in lower-light areas.
Fig, 11a Hammer Icon Torque indicator
Fig. 12
LED
worklight
Variable
:h
BIT STORAGE (Fig, 13)
When not is use, the bit provided with the
drill can be stored on the base of the drill by
snapping it into place in the bit clip.
Fig. 13
19