Craftsman 26302 - Professional 20 Volt Lithium-Ion Operator's Manual
Craftsman 26302 - Professional 20 Volt Lithium-Ion Operator's Manual

Craftsman 26302 - Professional 20 Volt Lithium-Ion Operator's Manual

Lithium-ion cordless 1/2-in. drill/driver

Advertisement

Operator's
Manual
LITHIUlVi=ION
CORDLESS
1/2-in. Drill/Driver
Model
No.
320.26302
320.29032
320.29036
,WARRANTY
,SAFETY
• ASSEMBLY
= DESCRIPTION
=OPERATION
=MAINTENANCE
,_ WARNING:
To reduce the risk
of injury, the user must read and
understand
the operator's manual
before using this product.
CHARGE
BATTERY
BEFORE
FIRST
USE
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman
web page: www.sears.com/craftsman
Save this manual
for future
reference

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 26302 - Professional 20 Volt Lithium-Ion

  • Page 1 CHARGE BATTERY understand the operator's manual BEFORE FIRST before using this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman Save this manual for future reference...
  • Page 2: Table Of Contents

    Professional tool fails due to a defect in material or workmanship, RETURN IT TO THE NEAREST SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES for free replacement during the first year from the date of purchase, and for free repair during the second year from the date of purchase.
  • Page 3: Safety Symbols

    The purpose ofsafety symbols istoattract your attention topossible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. symbol warnings DO NOT b ythemselves eliminate any danger. The instructions and warnings they g ive areno substitutes forproper accident prevention measures.
  • Page 4 Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DES|G NAT|ON/EXPLANAT|ON Volts Voltage Amperes Current Hertz Frequency (cycles per second)
  • Page 5 _,WARN|HG; HEAD AND UNDEHSTAND ALL INSTHUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. The term "power tool" in all of the warnings listed below refer to mains-operated (corded) power tools or battery-operated (cordless) power tools.
  • Page 6 mDress p roperly. Do not wear loose clothing or jewelry. Keep your hair, clothing gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. m if devices are provided for the connection of dust extraction and collection facilities, ensure...
  • Page 7 SERVICE m Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. m When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual.
  • Page 8 ,_,WARN|NG: READ AND UNDERSTAND ALL iNSTRUCTiONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. ill Before using battery Charger/Adapter, read all instructions and cautionary markings in this manual, on battery Charger/Adapter, battery and product using battery to prevent misuse of the products and possible injury or damage.
  • Page 9 [] Disconnect ChargerlAdapter from the power supply when not in use. This will reduce the risk of electric shock or damage to the Charger/Adapter if metal items should fall into the opening. It will also help prevent damage to the Charger/Adapter during a power surge.
  • Page 10 Fig, I Two-Speed Gear Box Vents Auxillar Handle(available only in 320.28302) Torque Adjustment Ring Direction of Rotation Chuck Selector Jaws (FORWARD/CENTER Ratcheting LOCK/REVERSE) Keyless Trigger Chuck Switch Integrated LED Worklight • • Chuck 1/2-in. Ratcheting, single-sleeve keyless Motor 20 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed...
  • Page 11 • • °0 ¸ Chuck 1/2-in. Ratcheting, single-sleeve keyless Motor 12.0 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed LO 0-230 / HI 0-1,000 (RPM) Clutch 24 Position Torque 370 in. Ibs. Drill/Driver Weight (without battery) 3.07 Ibs. Battery Type Lithium-Ion Battery Voltage...
  • Page 12: Operation

    KNOW Y OUR DRILL/DRIVER (Fig. 1) the tool and in this operator's manual as well as a knowledge of the project you are attempting. _,WARN|NG:Thesafeuseofthisproductrequiresanunderstandingoftheinformationon Before use of this product, familiarize yourself with all operating features and safety rules. ADJUSTABLE TORQUE The drill has a 24-position clutch.
  • Page 13 POWER mThis Lithium-Ion battery pack i s equipped with a POWER BAR which is used to display the battery pack's remaining run time. Press the POWER BAR button to display the LED lights. The LED lights will stay lit for approximately 4 seconds.
  • Page 14 NOTE: A significantly reduced run time after fully charging the battery pack indicates that the batteries are near the end of their usable life and must be replaced. COLD WEATHER OPERATION I!1 This Lithium-Ion battery pack will provide optimal performance in temperatures between 32°F (0°C) and 104°F (40°C).
  • Page 15 LED FUNCTIONS OF CHARGER/ADAPTER (Fig. 4) Fig, 4 BATTERY GREEN LED iNDiCATOR ACTION PACK Charging will begin when Hot/Cold battery returns to (SEE NANUAL) Hi/LO TENP. battery 32°F (0°C)-104°F (40°C) Battery pack or Charger/ Defective i Flashing BATTERY Adapter is defective DEFECTIVE Charging Flashing...
  • Page 16 TO ATTACH BATTERY PACK ( Fig. 5) mLock t he trigger switch onthe drill b yplacing the direction ofrotation (forward/reverse/ center lock) selector incenter position mAlign t he raised portion onthe battery pack with the grooves onthe bottom ofthe drill, then attach t he battery pack t othe drill a s shown mMake s ure t he latch o nthe battery pack...
  • Page 17 TRIGGER SWITCH (Fig. 6) To turn the drill ON, depress the switch trigger. To turn it OFF, release the trigger. Direction of rotation VARIABLE SPEED (Fig. 6) selector The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.
  • Page 18 TWO-SPEED GEAR B OX (Fig. 8) Fig, 8 Two-speed The drill h as atwo-speed gear b ox designed gearbox fordrilling ordriving atLO orHIspeeds. A switch slide switch islocated onthe top ofthe drill t o select either LO or HI speed. When using drill in the LO speed range, speed will decrease and the drill will have more power and torque.
  • Page 19 LED WORKLIGHT (Fig. 11) The LED worklight located on the base of the drill will come on when the trigger switch is depressed. The LED worklight will turn off when the trigger switch is released. This provides additional lighting on the surface of the workpiece for operation in lower-light areas.
  • Page 20 USING THE AUXiLiARY HANDLE ASSEMBLY (ONLY AVAILABLE iN 320.26302 )(Fig. 15) An auxiliary handle assembly is packed with the drill for ease of operation and to help prevent loss of control. The handle can be rotated 360 ° and it can also be mounted on the To tighten opposite side for left hand use.
  • Page 21 WOOD D RILLING For m aximum performance, use high speed steel orbrad point bits forwood d rilling. mBegin d rilling atavery low speed t oprevent the bit f rom slipping off t he starting point, increase speed a s the drill b itbites i nto the material. mWhen d rilling "through"...
  • Page 22: Maintenance

    GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. _WARN|NG: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating...
  • Page 23 CHUCK REMOVAL (Fig. 17-19) The chuck can beremoved and replace bya new one. mLock t he trigger switch byplacing the direction ofrotation selector incenter position. ! Open t he chuck jaws. mInsert a5/16-in. orlarger hex key into the chuck ofthe drill a nd tighten the chuck jaws securely.
  • Page 24 ® © 20 Volt. LITHIUMqON CORDLESS 1/2-in. DRILL / DRIVER MODEL NUMBER 320.26302...
  • Page 25 20 Volt. MTHIUM-ION CORDLESS 1/2-in. DRILL/DRIVER MODEL NUMBER 320.26302 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. ITEM PARTS PART DESCRIPTION QTY.
  • Page 26 20 Volt. LITHIUM-ION CORDLESS 1/2-in. DRILL/DRIVER MODEL NUMBER 320.26302 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. iTEM PARTS PART DESCRIPTION QTY, 3400274000...
  • Page 27 o_J_J...
  • Page 28 12 Volt. LITHIUM=ION CORDLESS 1/2=in. DRILL/DRIVER MODEL NUMBER 320.29032 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. |TEM PARTS PART DESCRIPTION QTY, 3810357000...
  • Page 29 12 Volt. LITHIUM=ION CORDLESS 1/2=in. DRILL/DRIVER MODEL NUMBER 320.29032 The Model Number will be found on the Nameplate attached to the right side o1the drill. Always mention the Model Number in all correspondence regarding your tool. ITEM PARTS PART DESCRIPT|ON QTY, 3122817000 SPEED CHANGE BUTTON...
  • Page 30 €_ €_...
  • Page 31 16 Volt. LITHIUM-ION CORDLESS 1/2-in. DRILL/DRIVER MODEL NUMBER 320.29036 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. ITEM PARTS PART DESCRIPTION QTY.
  • Page 32 16 Volt. LITHIUM=ION CORDLESS 1/2=in. DRILL/DRIVER MODEL NUMBER 320.29036 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. ITEM PARTS PART DESCRIPTION GTY, 3122817000...
  • Page 36 Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! iiiiiiiiiiiiiiii For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. iiiiiiiiiiiiiiii For Sears professional installation of home appliances and items like garage door openers and water heaters.

This manual is also suitable for:

320.26302320.29032320.29036

Table of Contents