Download Print this page

Craftsman 320.10320 Operator's Manual

16.0-volt lithium-ion cordless 3/8-in. drill/driver


Quick Links

3/8=Jno DrilHIDtivet
Model No.
A_k WARNING: To reduce the risk
of injury, the user must read and
understand the operator's manual
before using this product°
Sears, Roebuck and Co., Hoffman Estates, tL 60179 USA
Visit the Craftsman web page:
Save this manual for future



Summary of Contents for Craftsman 320.10320

  • Page 1 CHARGE BATTERY understand the operator's manual BEFORE FIRST before using this product° Sears, Roebuck and Co., Hoffman Estates, tL 60179 USA Visit the Craftsman web page: Save this manual for future reference...
  • Page 2: One Year Full Warranty

    If this Craftsman tool fails to give complete satisfaction within one year from the date of purchase, return it to any Sears store or parts & repair center or other craftsman outlet in the United States for free repair (or replacement, if repair proves impossible)°...
  • Page 3 Thepurpose ofsafety symbols is toattract y ourattention to possible dangers. Thesafety symbols andtheexplanations withthemdeserve yourcareful a ttention andunderstanding. The symbol w arnings D ONOTbythemselves e liminate anydanger.. Theinstructions a ndwarnings theygivearenosubstitutes f orproper a ccident p revention m easures. ,_WARNUNG: BE SURE to read and understand all safety alert symbols such as "DANGER", "WARNING"...
  • Page 4 Some of these following symbols may be used on this tool.. Please study them and learn their meaning.. Proper interpretation of these symbols will allow you to operate the tool better and safer,_ NAME DESBGNATUOHIEXPLANATION SYMBOL Volts Voltage Current Amperes Hertz Frequency (cycles per second) Watt...
  • Page 5 ,_WARH!IHG: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. The term "power tool" in all of the warnings listed below refer to mains-operated (corded) power tools or battery-operated (cordless) power tools.
  • Page 6 ml Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or tong hair can be caught in moving parts. _1 if devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
  • Page 7 SERVICE [] Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power toot is maintained, [] When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual.
  • Page 8 instructions listed below may result in electric shock, fire andlor serious personal injury. _.WARNIING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all I_ Before using battery ChargertAdapter, read all instructions and cautionary markings in this manual, on battery Charger/Adapter, battery and product using battery to prevent misuse of the products and possible injury or damage,.
  • Page 9 Disconnect Charger/Adapter from the power supply when not in use. This wilt reduce the risk of electric shock or damage to the Charger/Adapter if metal items should fall into the opening It will also help prevent damage to the Charger/Adapter during a power surge°...
  • Page 10 F_g. 1 Two-Speed Gear Box Torque Vents Adjustment Ring Direction of Rotation Selector (FORWARD/CENTER LOCK/REVERSE) Ratcheting Keyless Chuck Trigger Switch Integrated LED Worklight Chuck 3/8-in. Soft Grip Chuck Motor 16 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed LO 0-280 / HI 0-1,200 (RPM) Clutch 24 Position...
  • Page 11 KNOW YOUR DRILL/DRIVER (Fig. 1) ,_k',tVARNIING; The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules_ ADJUSTABLE TORQUE The drill has a 24-position clutch_ The torque adjustment clutch can be turned to select the right...
  • Page 12: Power Bar

    POWER BAR B This Lithium-Ion battery pack is equipped with a POWER BAR which is used to display the battery pack's remaining run time, Press the POWER BAR button to display the LED lights.. The LED lights will stay lit for approximately 4 seconds.
  • Page 13: Cold Weather Operation

    NOTE: A significantly reduced run time after fully charging the battery pack indicates that the batteries are near the end of their usable life and must be replaced. COLD WEATHER OPERATION [] This Lithium-Ion battery pack will provide optimal performance in temperatures between 32°F (0°C) and 104°F (40°C)..
  • Page 14 LED FUNCTIONS OF ChargerlAdapter (Fig. 4) Fig. 4 BATTERY GREEN ACTION LED INDICATOR PACK Charging will begin when HotlCold battery returns to (SEE MANUAL) battery I/LO TEMP,, 32OF (0°C)_104°F (40°C) ,,,..,, ,,,,,, ,, Battery pack or Charger/ Defective Flashing Adapter is defective BATTERY...
  • Page 15 _CAUTBON; When placing the battery pack in the tool, be sure the raised rib on the battery pack aligns with the bottom of the drill and latches into place properly. Improper installation of the battery pack can cause damage to internal components. _WARNIING: Do not attempt to modify this drill or create accessories recommended...
  • Page 16 TRIGGER SWITCH (Fig. 7) Fig, 7 To turn the drill ON, depress the switch trigger, To turn it OFF, release the trigger. Direction of rotation VARIABLE SPEED (Fig, 7) selector The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.
  • Page 17 TWO-SPEED GEAR BOX (Fig, 9) Fig. 9 Two-speed The drill has a two-speed gear box designed gear box for drilling or driving at LO or HI speeds. A switch slide switch is located on the top of the drill to select either LO or HI speed.
  • Page 18 LED WORKL1GHT (Fig. 12) Fig. 12 The LED worklight located on the base of the drill will come on when the trigger switch is depressed, The LED worklight will turn off when the trigger switch is released° This provides additional lighting on the surface of the workpiece for operation in lower-light areas.
  • Page 19 STRAIGHT DRILLING (Fig 16) Fig. t6 [] The dirtl has a bubble vial that can indicate Bubble vial straight when you wanted straight drill, by ..doing this, just need to make sure the bubble is in the center of the vial.. DRILLING (Fig 17) [] Check the direction of rotation selector for the correct setting (forward or reverse).
  • Page 20: Wood Drilling

    WOOD DRILLING Formaximum performance, usehighspeed steelor bradpointbitsforwooddrilling [] Begin drillingata verylowspeed toprevent t hebitfromslipping offthe starting point.. Increase speed as thedrill bitbitesintothematerial° [] Whendrilling "through" h oles,placea blockofwoodbehind theworkpiece to prevent r agged or splintered edges onthe backsideoftheholeo METAL DRILLING For maximum performance, use high speed steel bits for metal or steel drilling,.
  • Page 21 GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc, _WARHIING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts.
  • Page 22 CHUCK REMOVAL ( Fig,18-20) Ratcheting Fig. 18 keyless Thechuckcanberemoved andreplace bya chuck newone. Mallet E Lockthetriggerswitchbyplacing the direction ofrotation selector i ncenterposition, [] Openthechuck jaws,. M Inserta 5/16-in, o r larger hexkeyintothe chuckofthedrillandtighten thechuckjaws securely. [] Tapthehexkeysharpfy witha malletin Chuck a clockwise direction.
  • Page 24 16.0 VOLT LITHIUM-ION CORDLESS 3/8-in. DRILL/DRIVER MODEL NUMBER 320.10320 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. IIT_M NO. PARTS PART DESCRIIPTION QTY.
  • Page 25 16.0 VOLT LtTHIUIVI-ION CORDLESS 3/8-in. DRILL/DRIVER MODEL NUMBER 320.10320 The Model Number wil! be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool ITEM NO. PARTS PART DESCRIPTIOINI QTY.
  • Page 28 Get it fixed, at your home or ourS! Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold For the replacement parts, accessories owner's manuals that you need to do-it-yourself,...