How To Charge; The Battery Pack - Craftsman 320.29004 Operator's Manual

HOW TO CHARGE THE
BATTERY PACK
NOTE: This Lithium-Ion battery pack is shipped partially charged. Before using it the
first time, fully charge the battery pack.
A fully discharged battery pack with a
temperature between 32°F (O°C) and 104°F
(40°C) will charge in about 50 minutes.
• Charge the Lithium-Ion battery pack only
with the correct charger.
• Connect the charger to a power supply.
• Attach the battery pack to the charger by
aligning the raised ribs of the battery pack
with the slot in the charger. Slide the battery
pack onto the charger (Fig. 3, 3a)
• The charger will communicate with the
battery pack's SmartChip
TM
circuitry to
evaluate the condition of the battery pack.
• The POWER BAR LED lights will cycle from
right to left during charging. This is part of
the normal charging operation.
• After charging is complete, the green LED
on the charger will come on and the POWER
BAR LED lights will go off. The POWER BAR
LED lights will not be displayed when the
POWER BAR button is pressed while the
battery pack is on the charger.
• The battery pack will fully charge, but will not
overcharge, if left on the charger.
Fig. 3
Charger# 320.25709
Fig. 3a
Charger# 320.257091
I NOTE: For your convenience, the charger can operate with most generators and I
I
inverters rated at 300 watts or higher.
I
14