Table of Contents
Advertisement
PRODUCT
SEPCIFICATIONS
Motor
19.2 Volt DC
Chuck
1/2 in. (13mm)
No-load
Speed
LO 0-470/min/HI
0-1800/min
Clutch
22 Position
Torque
600 in.lbs
Battery Type
Lithium-Ion
Battery Voltage
19.2 Volt DC
Charger Input
120-Volts,
60 Hz AC only
Optimum
Charging
Temperature
50°F (10 ° C) -104°F (40°C)
WARNING:
The safe use of this product requires an understanding
of the
information
on the tool and in this operator's
manual, as well as knowledge
of
the project you are attempting.
Before use of this product,
familiarize yourself
with all operating
features and safety rules.
ADJUSTABLE
TORQUE
The drill/driver has a 22-position clutch: 1 drill position and 21 torque positions.
TWO=SPEED
GEARBOX
The two-speed
gearbox is designed for drilling or driving at LO or HI speeds. A slide
switch is located on top of your drill/driver for selecting the appropriate
speed.
VARIABLE
SPEED
The variable-speed trigger switch delivers higher speed with increased trigger
pressure and lower speed with decreased trigger pressure.
KEYLESS
CHUCK
The keyless chuck allows you to hand-tighten or releasethe drill bit in the chuck jaws.
FORWARD/CENTER=LOCK/REVERSE
The drill/driver
has a direction-of-rotation
selector
located above the trigger
switch for changing
the direction
of bit rotation.
Setting the trigger switch in the
OFF (center-lock)
position
helps reduce the possibility
of accidental
starting
when not in use.
LED WORKLIGHT
The LED worklight, located on the front of the drill/driver, illuminates when the trigger
switch is depressed.
This feature provides extra light for increased visibility.
11
Advertisement
Table of Contents
